ClassikFan
Active Member
- Posts
- 328
- Location
- Surrey
Just fitted a new rear wiper motor and checked rear washer nozzle is clear. Rear washer impeller makes the right sort of noise when activated but still nothing is coming out. Any ideas?
Disco 2 Rear washer
- Thread starter ClassikFan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ClassikFan
Active Member
- Posts
- 328
- Location
- Surrey
Does the line run inside the body?
Jokes about ingenious irrigation systems aside, yes.
There's a little one way valve in the pipe inside the tailgate - mine was all blocked up. I just took it out & replaced it with a straight bit of tubing. It didn't actually seem to do anything much as the rear washer works perfectly well (with a few seconds delay).
ClassikFan
Active Member
- Posts
- 328
- Location
- Surrey
I was looking at that little valve yesterday, shame I didn't check it from the in side. The tube to the outlet on the wiper arm is clear.
ClassikFan
Active Member
- Posts
- 328
- Location
- Surrey
Took the tailgate door card back off again just now and the little one way valve was blocked. It is now a two way valve and for the first time in over 3 years of ownership I now have a rear wiper that stops in the right place and a working washer. Thanks iansoady.
