Puma washer and wiper not working

tombatley said:

Hi,
My wipers are working when I click up to the higher speed settings, however the slower interval when I click down does nothing. Also the washer liquid comes out but the wipers do not activate.
I’ve checked the fuses, doesn’t seem to be an issue there.
Any ideas?

Many thanks

Click to expand...

dag019 said:

I would disagree with both of the above and start with the relay. the intermittent wipe and the remain on with wash for a limited period is programmed into the relay as part of a circuit board rather than being a simple switched relay. During my rebuild I had a similar problem and when investigating realised a I had fitted a flasher relay to the wipers. The two speed sup on the switch are controlled by a simple switch function on the relay the other two functions you have lost are electronic wizardry within the relay.

Click to expand...