Rear view camera.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gkcuk

Member
Posts
20
Hi All,

I'm looking for a bit of advice please, I'm thinking of installing a reversing camera on my Evoque pure tech 2014. I have a genuine camera and housing installed in the tailgate with the tailgate wiring. The head end unit says "Park assist camera....shutdown ....available " Does this mean I just need to run a cable from the back to the unit and then get someone to activate the settings?

Regards Gray.
Evoque Pure tech 2014.
 

Attachments

  • 20230808_163726.jpg
    20230808_163726.jpg
    282.9 KB · Views: 121
Very unlikely that you will need to run a cable as all signals use the CANBUS system on modern vehicles. The camera will need to be programmed in to the appropriate ECU's
 
Hi Guys, Thanks for the advice, I should have mentioned that the car didn't come factory fitted with a reversing camera, I have obtained a replacement tailgate after a recent mishap and the replacement is off a dynamic that came fitted with a camera. I have a 2014 Evoque Pure tech SD4 manual shift.

Cheers Gray.
 
Hi Guys, Thanks for the advice, I should have mentioned that the car didn't come factory fitted with a reversing camera, I have obtained a replacement tailgate after a recent mishap and the replacement is off a dynamic that came fitted with a camera. I have a 2014 Evoque Pure tech SD4 manual shift.

Cheers Gray.
It's still likely that the connection for the camera will be there but it may be via a dedicated ECU that is missing knowing JLR.
 
Hi Guys, I have connected the camera up and lo and behold as mentioned no image, the settings on the infotainment centre probably need changing but I guess they have to be programmed by a technician with a computer.

Thanks for your help.
Gray.
 
Back
Top