Rear Storage drawers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jai_landrover

jai_landrover

Well-Known Member
Posts
13,408
Location
Luton
Rear storage drawers for a 90 110 or 88 inch. I have drawn up some dimensions for the local metal fabricator to bend up for me out of sheet steel so I can weld together myself as a kind of kit.

Am awaiting a price but is there anyone else interested??
 
Well mine is not full depth at all. The one I have asked to be bent up is 880mm wide fit between the wheel boxes with some spare for insulation, and 220 high to sit flush with wheel boxes and depth I've gone only 750mm because I want to have a row of water jerry can and a compressor behind the bulkhead in my 90 and the rest draws. Will find out the price tomorrow I left it with the guy. I have runners I robbed from an scrapped photocopier and latches and latch will need to be welded all the guy is doing is folding up 3 U sections and cutting fronts and backs for the 2 draws and a lid and back for the main box aswell as a Z section for support and center runnering mounts
 
Last edited:
Spyderman got a nice sturdy box from anchor supplies for £35 notes which wasnt bad but doesnt fit exactly it fits his perrrrfect as he has waffles on one side. It sits higher than the wheel box aswell but for the money really really isnt bad at all was tempted meself if the height was lower I must admit I woulda got one
 
jai_landrover said:
Spyderman got a nice sturdy box from anchor supplies for £35 notes which wasnt bad but doesnt fit exactly it fits his perrrrfect as he has waffles on one side. It sits higher than the wheel box aswell but for the money really really isnt bad at all was tempted meself if the height was lower I must admit I woulda got one
Click to expand...

ImageUploadedByTapatalk1347570810.343764.jpg these do you? £3 each not inc delivery. Used but solid and just under height of wheel box
 
Unfortunatly the other half enjoys side slopes and getting to recovery equipment tools and spares for comp motor while extracting a dead motor usually while trying to defy gravity and having the rear loaded to the roof with camping gear means a drawer is the onlyt real soloution hopefully its not going to be too expensive.
 
I made my full drawers from plywood and varnished the **** out of it. I had some 100kg runners left over from my work toolbox so i used them. Fits really well in between the arches swell. The only downside is its made of wood so will eventually rot im sure. When it does i fancy getting one made from metal.

Will keep an eye on this. :)
 
You must log in or register to reply here.

Similar threads

DiscoEsko
Recommendations for DII rear lift springs?
Replies
3
Views
706
sierrafery
sierrafery
A
90 disc brakes on rear
Replies
0
Views
515
Archer22
A
ER1C
For Sale Hannibal Roof tent/rack/Awning - Complete 110 camping solution
Replies
0
Views
1K
ER1C
ER1C
M
Disco 1 Measurements for Rear Door Gap
Replies
14
Views
2K
resto_d1
R
jimllshiftit
Any advice for novice welder about to stitch new rear cross member to 90 chassis?
Replies
6
Views
2K
ER1C
ER1C
Back
Top