Wonky Donky 49
Member
- Posts
- 39
- Location
- Headingley
rear step disco 2000
- Thread starter Wonky Donky 49
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bin it.
hughdavies
Well-Known Member
- Posts
- 1,324
- Location
- Western Brecon Beacons mynudd du.
Not good for serious ofroaders but my solution-- good for kids to sit on, adults to put theire feet on and my old dogs to go in and out.==
.
.
.
.
discool
Well-Known Member
- Posts
- 13,511
Wonky Donky 49
Member
- Posts
- 39
- Location
- Headingley
Technically all drs are boats lol...Stop dipping the arse in salty water when launching your boat. But rear end rust is inevitable with a D2 is in not
And my D1 after 25 years … I don’t have a boat
Technically boats do a better job of
A) coping with water.
B) keeping it on the outside.
Sorry
.J
Wonky Donky 49
Member
- Posts
- 39
- Location
- Headingley
Technically boats do a better job of
A) coping with water.
B) keeping it on the outside.
Sorry
J
I agree, chuck that bit in the scrap pile, with the rest of the chassis. Mine went within weeks of buying the old girl. Far too expensive to put a genuine step back on, unless you have more money than sense, or a good source of second hand parts...
Wonky Donky 49
Member
- Posts
- 39
- Location
- Headingley
found a small fab shop that will sort...... fingers crossed.....
I would have used that as a good excuse to buy a welding machine and get practicing, you will need that skill sooner rather than later
.J
Wonky Donky 49
Member
- Posts
- 39
- Location
- Headingley
Please don't mention welding after the carry on I had with a supposedly Landrover garage......I would have used that as a good excuse to buy a welding machine and get practicing, you will need that skill sooner rather than later
Gear grind after 1/2 chassis
Hi all, and apologies first of all. A newby!! Ive had the discovery for many years and pottered with small bits. After failings its mot i took the plunge to get the 1/2 chassis replacement ££££££ got it done Anyhow after driving away from the garage the 2nd and 4th gears were grinding when going...
www.landyzone.co.uk
Wonky Donky 49
Member
- Posts
- 39
- Location
- Headingley
Wonky Donky 49
Member
- Posts
- 39
- Location
- Headingley
Thats after buddy.... It was like wafer thin
