rear sear belts

gstuart · Apr 9, 2011

hiya guys

i went to fit some rear selt belts on my converted 3 door freelander.

have been trying to work out how they fit but im convinced theres a bracket missing to mount them on.

has anyone got a pdf picture of the rear seat belt mountings please as i cannot access my microcat.

if it may show the part numbers please that would be great, not sure how they mount on.

as it use to be a 3 door commercial van im pretty sure something is missing.

hope your all keeping well and enjoying the sunshine.

thanks as always guys

gary

Hippo · Apr 9, 2011

Any good?

DSCN1368 7H2moAo

DSCN1370 92M8khq

DSCN1363 PL78QWK

DSCN1333 JRoMSjA

gstuart · Apr 11, 2011

hiya buddy

thanks so much for taking the time taking the pictures for me.

how ever im afraid mines a 3 door .

ive been trying to get the microcat to work with vista and just given up, copied the mg16 file in and still doesnt work

thanks again my friend for taking the time

all the best

gary

Hippo · Apr 11, 2011

Pic's were taken last time I took it apart.

Microcat is available online here: LandRover
Not sure how much of it is there.

Pic below of how the seat belts line up. Perhaps someone wiff a 3 door will have picks of their setup.

gstuart · Apr 14, 2011

bless you for the info.

had a look at the online microcat, not wishing to be ungrateful but do you know if there is an online english version please as it would be alot easier than trying to muck around getting the microcat download to work.

ive since been down the breakers to have a look at another 3 door freelander and noticed it has a bracket welded for the seat belts.

As i need brackets welded on, i went down to Dakar in swanley who are going to do the brackets and mount the seat belts for me.

i must add of how helpful they were and had a really nice customer manner. going to get them to MOT the car at the same time.

thanks so much again

gary

Hippo · Apr 14, 2011

There's another here, but it doesn't have the same amount of info. Microcat - Spare parts Land Rover catalogue in English

Is your windows 7 a 64bit version? If so, then you can run microcat in what peeps call XP compatability mode.

http://www.landyzone.co.uk/lz/f10/how-do-i-use-microcat-123643-3.html

Microcat on Modern Operating Systems - LR4x4 - The Land Rover Forum

Microcat and Windows 7 - LR4x4 - The Land Rover Forum

mike424u · Feb 9, 2013

Hi guys.
I also have rear seat belt issues.
I bought my present freelander TD4 on the cheap just for work, but it has no rear seat belts. The seats are fitted. and center belt fitted.
I purchsed a couple of rear seat belts from ebay, but now I need to work out how they bolt on in. I can find the piller mount and floor mount, but dont have a clue were the inertia part bolts on to. some where around the strutt top at a guess.
I have a feeling my freelander was a comercial in its past life, 2005 3dr whith removable roof. I have seen a few post about having brackets welded in. I cant seem to find any info about this or where to buy the brackets, I can weld them in if I can find them. any ideas. Thanks Mike

rear sear belts

gstuart

D3 Grandad

Hippo

Lord Hippo

gstuart

D3 Grandad

Hippo

Lord Hippo

gstuart

D3 Grandad

Hippo

Lord Hippo

mike424u

New Member

Similar threads