1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

rear door fitting

Discussion in 'Defender 90 / 110 / 130' started by alexc2701, Apr 21, 2017.

< Previous Thread | Next Thread >
  1. alexc2701

    alexc2701 Active Member

    Joined:
    Mar 25, 2017
    Posts:
    669
    Likes Received:
    77
    Location:
    Nottingham
    I found a diagram that mostly seems to match my loom. Took ages! So hopefully if I just wire it up to match the signals for the warning light boxes it should be okay. Should. hhaha
    The transducer etc is in now and wiring for that but I think it'll over read from the Disco speedo gear. Just gana have to wait an age for ebay resolution team! Till 30th before refund if doesn't arrive so gota wait till can bid for a new one.. gah.
     
  2. Al2O3

    Al2O3 Well-Known Member

    Joined:
    Apr 21, 2014
    Posts:
    8,193
    Likes Received:
    2,478
    Location:
    North of the Wall
    What a pain. Hopefully, they will get that seller removed too, though they will probably just set up with a new account. :mad:
    You'll be able to check the speed with a sat nav.
     
    alexc2701 likes this.
  3. wonderdust

    wonderdust Member

    Joined:
    Aug 17, 2011
    Posts:
    40
    Likes Received:
    3
    Hi, I just used of universal cl kit of ebay and connected it to a Hawk alarm. I put the cl module in the cabin fuse box and ran the wires up through the dash up the A pillar behind the roof lining and down the rear door seal and through a rubber grommet into the rear door, You can see the wires in the pic, sounds like a lot but wasn't to bad. One thing a did use was a sparks fish wire for all the dash work.
     

    Attached Files:

  4. alexc2701

    alexc2701 Active Member

    Joined:
    Mar 25, 2017
    Posts:
    669
    Likes Received:
    77
    Location:
    Nottingham
    That's a good idea I was thinking of fishing it through the chassis to the back and through where the washer wires come in. I'm unsure what's in the tdci bulkhead itself and whether i can use any of it
     
< Previous Thread | Next Thread >