rear door fitting

[alexc2701]

Forgot about the Tdci bulkhead! All that wiring sounds like a bit of a pain to sort. Great once done though! Good luck with the clocks!

I found a diagram that mostly seems to match my loom. Took ages! So hopefully if I just wire it up to match the signals for the warning light boxes it should be okay. Should. hhaha
The transducer etc is in now and wiring for that but I think it'll over read from the Disco speedo gear. Just gana have to wait an age for ebay resolution team! Till 30th before refund if doesn't arrive so gota wait till can bid for a new one.. gah.

 

[Al2O3]

I found a diagram that mostly seems to match my loom. Took ages! So hopefully if I just wire it up to match the signals for the warning light boxes it should be okay. Should. hhaha
The transducer etc is in now and wiring for that but I think it'll over read from the Disco speedo gear. Just gana have to wait an age for ebay resolution team! Till 30th before refund if doesn't arrive so gota wait till can bid for a new one.. gah.

What a pain. Hopefully, they will get that seller removed too, though they will probably just set up with a new account.
You'll be able to check the speed with a sat nav.

 

[wonderdust]

That looks pretty simple and same lock as mine, what central locking kit did you use and how much was it? Where did you run your new wiring?

Hi, I just used of universal cl kit of ebay and connected it to a Hawk alarm. I put the cl module in the cabin fuse box and ran the wires up through the dash up the A pillar behind the roof lining and down the rear door seal and through a rubber grommet into the rear door, You can see the wires in the pic, sounds like a lot but wasn't to bad. One thing a did use was a sparks fish wire for all the dash work.

 

[alexc2701]

Hi, I just used of universal cl kit of ebay and connected it to a Hawk alarm. I put the cl module in the cabin fuse box and ran the wires up through the dash up the A pillar behind the roof lining and down the rear door seal and through a rubber grommet into the rear door, You can see the wires in the pic, sounds like a lot but wasn't to bad. One thing a did use was a sparks fish wire for all the dash work.

That's a good idea I was thinking of fishing it through the chassis to the back and through where the washer wires come in. I'm unsure what's in the tdci bulkhead itself and whether i can use any of it