rear brakes
- Thread starter hodge69
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,628
D1, 2 or what, the answers will be different and get yourself a Haynes Manual for your disco, how to do the work is shown there.
Jason2
Well-Known Member
- Posts
- 2,001
- Location
- Poitou Charentes-France
Easy job!
Unless your brake pipes are rotten and might break when you take the calipers off (you have to tie them out of the way supported).
I would change the wheel bearings and seals at the same time.
Unless your brake pipes are rotten and might break when you take the calipers off (you have to tie them out of the way supported).
I would change the wheel bearings and seals at the same time.
Diesel man
New Member
- Posts
- 55
- Location
- Morley, Leeds. west yorks
Brakes are easy if you know what your doing but if you don't & you can have serious problems with your life or mine!!
Not trying to scare you but if you don't have a clue leave it to somebody who does.
Not trying to scare you but if you don't have a clue leave it to somebody who does.
