Rear Axle

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gblow

New Member
Posts
63
hi i have a disco 300tdi rear axle which needs changing. i have been given a very good range rover rear axle, if i take the diff out of the range rover axle would i be able to put my disco 300tdi rear diff in it. :rolleyes:
 
Last edited:
I believe the axles on the RRC and the Disco are the same, the difference being the diff is a higher geared in the RRC so by rights yes the diffs should just be a straight swap.

If its a P38 RR axle it won't swap.

I may be wrong so don't quote me - standing by to be corrected.
 
Pretty sure RRC and disco axles are interchangeable. Diffs too. Disco, RRC, 90, 110 etc have the same 3.54:1 diff ratio, it's the transfer box gearing that differs.
 
ive got a m reg disco :doh:

Change-over dates are always 'flexible', you may be in luck with a 24-spline, just depends on when the axle was built. Ours (1999) has the date codes etched on the casings, might be worth having a look.

I don't know what else is changeable that might help your proposed swap, maybe one of the other guys can help there.

Peter
 
Change-over dates are always 'flexible', you may be in luck with a 24-spline, just depends on when the axle was built. Ours (1999) has the date codes etched on the casings, might be worth having a look.

I've got an August 94 registered Disco 300TDi, where would I check to see whether I had a 10 or 24 spline diff?
 
Back
Top