Rear Axle Play Disco

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Duky Disco

New Member
Posts
61
Just been doing the oil levels on my disco and i noticed the rear pads are shot when i removed them i can pull the brake disc towards me and it moves about 15mm each way is this normal ? or do i need to check the rear bearing ? any help would be grateful

Cheers Andy
Car in Question Below
SDC11811.jpg
 
Yup .. but looking at your motor I'd be inclined to at least take the hubs off and check the bearings for wear and strip/clean them and replace the grease .. water, mud and wheel bearing grease make a nice paste ...
 
Back
Top