Re Mondo Mod

I have removed the lot, cleaned and greased the splines of both the propshafts and the VCU. The whole assembly will now take about twenty minutes to replace before next winter. Meanwhile the VCU sits on my coffee table and I wait for the inspiration which will make me very wealthy (hopefully before Ming) when I figure out how to make this thing selectable from the drivers seat. Dann...

Dann said:

I have removed the lot, cleaned and greased the splines of both the propshafts and the VCU. The whole assembly will now take about twenty minutes to replace before next winter. Meanwhile the VCU sits on my coffee table and I wait for the inspiration which will make me very wealthy (hopefully before Ming) when I figure out how to make this thing selectable from the drivers seat. Dann...

Click to expand...

send me 1000 quid and i'll tell yer the secret

Dann said:

I have removed the lot, cleaned and greased the splines of both the propshafts and the VCU. The whole assembly will now take about twenty minutes to replace before next winter. Meanwhile the VCU sits on my coffee table and I wait for the inspiration which will make me very wealthy (hopefully before Ming) when I figure out how to make this thing selectable from the drivers seat. Dann...

Click to expand...

We knows how to do it. . . .jist not cost effective

ming said:

We knows how to do it. . . .jist not cost effective

Click to expand...

shut up ming yer space twot!! that just cost me a grand

slob said:

shut up ming yer space twot!! that just cost me a grand

Click to expand...

some one will come up with a good cost effective solution is just a matter of time.

ave got one, just int gort a gaylander to try it out on

go on then tell us

no, am looking into it at present, but i'll put yer on the list of potential trialist fer it

And when it happens how many people will say "Now why didn't I think of that"

Examples:

Cats eyes
Rubiks cube
Solar garden lights
Clackers (remember them?)

All of these simple things sold by the million. Can you think of some more examples? D..

Dann said:

Clackers (remember them?)

Click to expand...

Would that be the two snooker balls on a sandshoe lace?

Spot on!

Dann said:

Clackers (remember them?)

.

Click to expand...

Erm. . . .Clismas Clackers ?. . . .

ming said:

Erm. . . .Clismas Clackers ?. . . .

Click to expand...

Is them like plawn clackahs Wang?

bustersbus said:

Would that be the two snooker balls on a sandshoe lace?

Click to expand...

and usually found on telephone wires

Hi All , what about replacing vcu with an eddy current clutch ??? SOMSHOW

My Hippo's getting castrated, there taking outs its manly bit (propshaft and all that). VCU must have dufted befor I got the thing and at the last service the Transfer box oil was all silvery. So Save the £800 on an new front diff and 2 cogs and have a momento of what it could have been like hanging in the garage.. Note to check next time ... what colour is the TB Oil? and does the VCU have a part number label on it?.. hey LR says 'Lovely off road' trouble is got to go on road to get off road these days.

Hey ... that is interesting... got any more thoughts

Looking around the net there are a shat load of shaft coupling devices , but not sure how the drive train will handle them in place of the vcu.

sandgroper said:

Hi All , what about replacing vcu with an eddy current clutch ??? SOMSHOW

Click to expand...

It was looked into at least a year ago - here and here and here.

the most likely choice was one of these. There is a guy in Tassy that was making up a mechanical dog clutch (Ian1).

Did yu ever meet him, Dearot? I think he was supposed to be coming over to the UK this year.......