Re-Discovery

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
1988smithy said:
Trust me to buy the 1 that's scabbier than Daniella Westbrook's nostrils



It's getting patched with something and dunked in kurust, paint and grease in that order. Could be used in salt water or quarry as stuff I've scraped out from nooks and trannys, between brake flexis etc was quite sandy/silty
Click to expand...

Hi mate

For piece of mind I’m wondering if it’s worth getting a camera put inside ur chassis, there are tons of places for the camera to gain access through drainage holes , can go virtually the entire length

Also I’d be very tempted to remove the boot side trim

Nope , I’m not going to put pics up of the inside of my landy as I don’t want to rub it in, enough salt in the wound as it is

Always liked dinitrol, mines all done inside and out of the chassis and shell , only thing I noticed was a 10p size hole in the fuel tank support plate

Just don’t understand it’s just that spot and not right across, know the chassis are very well pre treated from the factory

Or wonder if a previous owner used it for work and stored corrosive items and it’s soaked through the floor over time ????

Please let us know how it goes with the plastic inner wheel arches removed

Did u want me to try and find panels for that area of have u already found them

Don’t forget some more piccies plse , sorry to ask
 
Last edited:
gstuart said:
Hi mate

For piece of mind I’m wondering if it’s worth getting a camera put inside ur chassis, there are tons of places for the camera to gain access through drainage holes , can go virtually the entire length

Also I’d be very tempted to remove the boot side trim

Nope , I’m not going to put pics up of the inside of my landy as I don’t want to rub it in, enough salt in the wound as it is

Always liked dinitrol, mines all done inside and out of the chassis and shell , only thing I noticed was a 10p size hole in the fuel tank support plate

Just don’t understand it’s just that spot and not right across, know the chassis are very well pre treated from the factory

Or wonder if a previous owner used it for work and stored corrosive items and it’s soaked through the floor over time ????

Please let us know how it goes with the plastic inner wheel arches removed

Did u want me to try and find panels for that area of have u already found them

Don’t forget some more piccies plse , sorry to ask
Click to expand...

Chassis is really good to be fair mate, just surface rust so I'm not concerned. If the rain holds off I'll get the arch liner out today and give the whole area a tap and wire brush and post pics. I'm just concentrating on the body, chassis just wants a lick of paint really.
I think it's generally okay to be honest, strange how it's just that spot, other side is quite scabby in same place but not rotten. Maybe with it being nearside it's had more share of ****e off the road on top of whatever it's been used for in the past. Spare tyre is a general grabber AT so I'd guess it's seen some off road work.

I've had a quick Google for panels but haven't come across any yet. I'm not holding my breath lol, doubt there's any places that churn repair panels out for these but it would be a big help cuz I can see this body mount being severe when I dig around it.

I have to point out, this is just a tool for me to get us out and about, it'll never be a show stopper and it's not worth spunking a load of money on for what I'll get back. Don't get me wrong, I'll do (and have done) whatever it needs mechanically so it doesn't let us down, i dont have a problem with spending to keep it roadworthy up to a point, but it'll never be same level as yours, it's just not financially viable for me.
 
Had a hammer and poke around, whipped a wire brush over it.
20190610_170212.jpg

20190610_170201.jpg


Excuse the caggy-handness, filmed on a phone and there ain't a lot of room under these. I get a bit chatty cuz I'm lonely and got no mates

 
Last edited:
1988smithy said:
Had a hammer and poke around, whipped a wire brush over it.
View attachment 180872
View attachment 180873

Excuse the caggy-handness, filmed on a phone and there ain't a lot of room under these. I get a bit chatty cuz I'm lonely and got no mates

Click to expand...


Having no mates is by far the safest way to be.

Thats some strange corrosion, totally rotted out one face yet the inside of the same box section is mint!

Dont forget the chassis and body are mega strong on their own never mind together so I would be inclined to think of weld best as can be done wothout cutting to much out, ie not a full on bodge but near enough is good enough, then treat the hell out of it.
Most of the localised steel looks quite manly so should not be to hard to get some decent welds.

All the rest of the surface corrosion underneath looks totally normal and much the same as my 06 car.
 
Forogt to say you see the flat black plastic cover on top of the chassis rail right behind the air bag top mount? behind that is a couple of electric plugs that can corrode and the wires can rub though on the chassis where they touch so whilst you are in there a quick look might be worth it.
I stuck some thin foam betwwn the wires and chassis on mine when I first got it.
 
@lynall you've just lowered my resting heart rate by about 20bpm! Sound advice I think, don't bodge it but don't go mad....

That is strange r.e inner box section, was nice to see though lol I think that's good regarding structural integrity?

I'll check those wires mate and let you all know what the welder wants to do tomorrow, but I'll be asking him to do (This sounds wrong but...) the bare minimum it needs
 
More Ooooh Pooooo:mad:

It’s strange just the 1 side. But get it sorted you know it makes sense.
You said fix it and switch it but you would get another;) only to maybe find the same:).

Maybe you should try the L322:D:)

Stick with it you know what you got then, if that’s all the rot you can find now and you fix it, then stay on top you should be good, for a good few years to come:) and even then be able to sell on an honestly well maintained one.

Rain don’t stop him looking put up your tent:)

J

P.S “should of kept the defender” said in the best possible smithy accent in a video I heard once:eek:
 
marjon said:
More Ooooh Pooooo:mad:
Click to expand...

That's what I said but more syllables and colour

marjon said:
It’s strange just the 1 side. But get it sorted you know it makes sense.
You said fix it and switch it but you would get another;) only to maybe find the same:).
Click to expand...

I know right? Don't get me wrong, t'other side wants a good going over and treating sooner rather than later but there's no rot. Yet.

marjon said:
Maybe you should try the L322:D:)
Click to expand...

Maybe I should just burn all my belongings and cash now :D

marjon said:
be able to sell on an honestly well maintained one.
Click to expand...

Agreed, I couldn't even chop this in at a dealers without feeling like a bellend

marjon said:
Rain don’t stop him looking put up your tent:)
Click to expand...

He's just phoned, I told him I don't expect him to get the kit out in this so he's gonna come and experience my drive campsite

marjon said:
P.S “should of kept the defender” said in the best possible smithy accent in a video I heard once:eek:
Click to expand...

A mere jest I assure ya, even I ain't that deluded really :p
 
You must log in or register to reply here.

Similar threads

V
Hello!
Replies
3
Views
350
brianp38dse
brianp38dse
M
19J timing case on 12L discovery engine
Replies
4
Views
257
lynall
L
F
New Discovery 1 project from France
2
Replies
21
Views
1K
FrenchyDisco
F
A
Series Landy Values
Replies
15
Views
2K
Anaconda
A
D
Body Swap Discovery 3
Replies
8
Views
366
Graculus
Graculus
Back
Top