Range Rover P38 Shock Absorbers

Morning all and compliments of the festive season.

I need to change a rear shock absorber on my P38 RR 4.6 HSE. Since they're
all original I thought I may as well change them all. On looking at a
couple of sites it seems that the Koni's sold by RPI Engineering/Rimmer
Brothers would appear to reduce body roll. If this is the case then they
would seem to be the way ahead. Has anyone out there fitted the Koni shock
absorbers and if so, do they show a marked improvement in body roll?

Grateful for info

Regards and thanks

Alan C

>>>>> "AC" == AC <[email protected]> writes:

AC> ahead. Has anyone out there fitted the Koni shock absorbers
AC> and if so, do they show a marked improvement in body roll?

Yes, I've fitted them. They do show an improvement in body roll,
though I think I compensate by cornering harder

Camberley Auto Factors are the UK importer and much cheaper than RPi.

Andy

--
Andy Cunningham -- www.cunningham.me.uk
Politicians are the same all over. They promise to build a bridge
where there is no river.
-- Nikita Krushchev