aollaku
Active Member
- Posts
- 259
- Location
- London, United Kingdom
Hi all. I have a RR. P38A 4.0 SE, 1996. My cruiser controler dose not work. Can someone help me with repair manual for this section???
Range Rover Cruiser Control repair manual
- Thread starter aollaku
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 16,482
Download the RAVE manuals from Wammers How To in the 'How To' section and you'll find the information you so seek !!
mozz smith
Well-Known Member
- Posts
- 1,700
- Location
- tameside manchester
hi, if you look at the unit under the bonnet and look across to far right near the e.a.s. unit .then theres 3 pieces of rubber pipe on a 't' junction replace them, I think there about 6ml thick and you should find it will work ok .cheers mozz p.s. do as sainty suggests and download rave all the info for everything is in there !!!!!
Rick-the-Pick
Active Member
- Posts
- 782
- Location
- Hove, Sussex.
Cruise control might not be activated. Is there anything happening when you set the cruise?
- Posts
- 1,755
- Location
- Buckinghamshire.
There are a set of tests to carry out listed somewhere in the Electrical Troubleshooting manual.
Work your way through them and it'll show you where the fault is, but I'd check your pipes first.
You'll need to download RAVE and get ahold of a multimeter.
Work your way through them and it'll show you where the fault is, but I'd check your pipes first.
You'll need to download RAVE and get ahold of a multimeter.
aollaku
Active Member
- Posts
- 259
- Location
- London, United Kingdom
When i pres the button on the steering wheel i hear a click. Thast all
