Range Rover Classic Window switches A or B?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Gun7354

Active Member
Posts
275
Location
Notts
Happy Easter everyone,

Before i go out and tinker, I've ordered off tinter web 2 x used switches for my electric windows (G Plate 3.9 Classic). I only need one switch but the one i'm replacing has an A on it and the spare one that came with it has a B on! They both look the same so could i also use the B type as a spare?

Thank you

Rich
 
Never noticed that before even though I replaced a couple of mine years ago!
I think it's probably to do with the the arrows on the front of the switch, one end being solid white & the other white outline with a black centre.
Try the part numbers on Rimmer's site & you'll see what I mean on their pics of the switches.
Lrcat says:
PRC5254 - Switch Rocker Electric Window Lift Rear Type A Red RH
PRC5255 - Switch Rocker Electric Window Lift Rear Type B Yellow LH
Doesn't show fronts separately although for the two door cars the above part numbers are also shown but as Blue & Green
 
Last edited:
I've had bad experiences with these devices.
When substituting switches in the past I've come across known good ones that operate on one RR, but not when transferred to another o_O
Good luck !
 
Back
Top