Range Rover classic drive belts

Morning All,

A bit of help please. I have a RR Classic 3.9 non serp. I would like to change the 4 belts that drive the viscous fan, the power steering pump, the alternator and aircon I can't identify either due to age and no markings on them. Most websites (Rimmers etc) state only two and name aircon with the remained being generic.

Thank you

Rich

Gun7354 said:

Morning All,

A bit of help please. I have a RR Classic 3.9 non serp. I would like to change the 4 belts that drive the viscous fan, the power steering pump, the alternator and aircon I can't identify either due to age and no markings on them. Most websites (Rimmers etc) state only two and name aircon with the remained being generic.

Thank you

Rich

Click to expand...

Both my parts catalogues show the 3.9 engines in a disco and RR and the various belt u requested, but based on vin and engine numbers and the info is spread over several pages, so a bit of searching is required, its much simpler with a SERP engine.
I believe u may find a parts catalogue on line now, if you wish to search yourself.

Discool many thanks,

Just been onto LRCat and got the part numbers - now to buy all 4.

Thanks

Rich

Well done

IIRC someone on another forum had an issue with one of the belt numbers which all the usual suspects said had been superseded to another number. This wasn't correct as the new part number was shorter than the old & next to impossible to get on never mind adjust. Can't remember which forum that was on unfortunately.

try the continental website, but don't believe the 925mm for the PS pump. you want a 950. I'll give you a prize if you can fit a bloody 925 (or your engine is weird...)
https://www.continental-engineparts...talog/PIC-Product-Information-Center-1/?lg=en

Choose your vehicle etc from the list and off you go.

Thanks for all the replies - all fitted and yes, what a pain to get some on.

Rich