Range rover asking for a code to start engine

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Posts
11
Location
Stoke
Hi everyone new to this so bear with me. Got a problem with me dads 2002 l322 v8 range rover. The battery went flat over a couple of days when he tried to open the car it wouldnt unlock. He put key in door unlocked it then recharged the battery. Key now unlocks the car turns on ignition but wont start just got code_ _ _ _ on dash help !!!!!
 
Hi everyone new to this so bear with me. Got a problem with me dads 2002 l322 v8 range rover. The battery went flat over a couple of days when he tried to open the car it wouldnt unlock. He put key in door unlocked it then recharged the battery. Key now unlocks the car turns on ignition but wont start just got code_ _ _ _ on dash help !!!!!

hi and welcome

have u tried posting over in the range rover section
 
Now thats a new one...an L322 asking for a start code.

The earlier L322's hade a Code function built into the SatNav / Radio / Infotainment system that can be set before you turn the car off, and requires it to be input before it will start the car.

It has been known in Bimmers that it can happen when the battery is flat, have you tried 0000.....

Else do some research on BMW E38 (7'er), E39 (5'er) and E53 (X5'er) security codes and see if there is something you can glean from there.
 
Now thats a new one...an L322 asking for a start code.

The earlier L322's hade a Code function built into the SatNav / Radio / Infotainment system that can be set before you turn the car off, and requires it to be input before it will start the car.

It has been known in Bimmers that it can happen when the battery is flat, have you tried 0000.....

Else do some research on BMW E38 (7'er), E39 (5'er) and E53 (X5'er) security codes and see if there is something you can glean from there.
Hi thanks for the reply. Cant find away to input a code nothing seems to work pressed all buttons but wont change from code _ _ _ _ !!!
 
It should be entered using the controls on the SatNav display......

Press Menu and using the right hand dial scroll down to CODE....press the dial in....using the same dial to enter the numbers, pressing the dial in after each entry.

If yours is the HSE model without the SatNav display, use the MID controls on the Radio display to select CODE and enter the numbers in there.

Gooooooooogle is your friend.
 
Back
Top