Radio,Clock issues

Slings1

New Member

Posts

4

• Aug 14, 2023

• #1

I’ve just changed my ignition barrel in my TD5, for a pattern barrel, the wiring loom was replaced to keep the original loom, everything is working except for my radio and clock, would anyone have any suggestions please how I can get them both to work again

 

jamesDiscoTD5

Active Member

Posts

94

Location

West Midlands

• Aug 14, 2023

• #2

Are the interior lights working?

I had this on my last D2 and it was fuse F20 on the interior fuseboard.

 

Slings1

New Member

Posts

4

• Aug 14, 2023

• #3

Hi, no I have just checked the interior lights are not working either, I just get the back lights in the radio and clock but no display, if I manually push button the radio will come on but I keep needing to enter the code , after it is turned off it loses the memory again , it seems like it's got no permanent feed after just changing the ignition barrel, I have used the original wiring loom .

 

Andy Warren

Well-Known Member

Full Member

Posts

2,061

Location

Hertfordshire

• Aug 14, 2023

• #4

Hi, was yours a Britpart replacement ign. switch ? Mine was just the barrel & had to fit the original 'switch' part & didn't have any issues. You could try removing the original switch part again & use a screwdriver in it but I can't think why it would make a difference.

 

Attachments

• 
  20220401_112001.jpg

  624.7 KB · Views: 110

Slings1

New Member

Posts

4

• Aug 14, 2023

• #5

jamesDiscoTD5 said:

Are the interior lights working?

I had this on my last D2 and it was fuse F20 on the interior fuseboard.

Click to expand...

Thanks James, I will check the F20 fuse out tomorrow in the day light