rad replacement instructions

im looking for instructions or a tutorial to change over 300tdi rad and if i need to fix anything else by default by doing it
cheers

Might help

Land Rover Workshop Manuals > 300Tdi Defender > COOLING SYSTEM > RADIATOR

thanks Station House i had a look but im to tierd to digest info
ive been at wickerman festival near dumfries and sitting here at work nearly sleeping
it was heavy going
i was hoping for a photo type thread with tools required etc so i can just go and collect and do it
in fact i want put a match to it thats how i feel today

Couldn't see a busters thread and not a task I've done myself

Hope festival was fun:cool2:

As you're sleepy, try this photo guide

Radiator Flushing - Land Rover Technical Archive - LR4x4 - The Land Rover Forum

wicker man is excellent weekend its like T in park for familys.
excellent until i spent 3hrs in layby waiting on tow truck just out side dumfries

Station House said:

As you're sleepy, try this photo guide

Radiator Flushing - Land Rover Technical Archive - LR4x4 - The Land Rover Forum

Click to expand...

works pc wont open this its blocked, will try at home cheers

biscuits said:

works pc wont open this its blocked, will try at home cheers

Click to expand...

Have the same issue with my firm

You might need to register to view the photos (free if you do) but from a quick look guide seems to give what you wanted

Hope the job goes smoothly

Not done a 300,yet! But my 200 was very straight forward. Just try and save fluid when draining or make sure you have the correct dilution of antifreeze when you top it up and bleed it properly.

mick the builder said:

Not done a 300,yet! But my 200 was very straight forward. Just try and save fluid when draining or make sure you have the correct dilution of antifreeze when you top it up and bleed it properly.

Click to expand...

i doubt theres any fluid left

what do i need to do, how many hoses to remove?

biscuits said:

i doubt theres any fluid left

what do i need to do, how many hoses to remove?

Click to expand...

As far as I remember, 2 top brackets left and right, top and bottom hoses right hand side. and 2 oil cooler pipes on the left along with the expansion pipe. Simples.

Can i take out rad without removing intercooler?

Believe me it's much easier to remove the rad and intercooler as one unit. Disassemble and reassemble when they're on the ground.

You can also give intercooler a good wash out as well.

Old rad out new rad in,new bottom hose
Plumbed in filled bled left to run with expansion cap off and every minute or so water spurts up
Is it fooked?