rob_90
New Member
- Posts
- 143
- Location
- Birmingham
Hi i have a 2 inch lift springs on my truck with 3 inch shocks i have cranked trailing arms and standard front radius arms would you consider changing them will it cause any probs with this setup?
Quick question
- Thread starter rob_90
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
No you'll be fine. Mate of mine was running a 4" lift on standard front arms till he put an Mib flex kit on it.
I'm running a 3" lift with just standard front arms and long drop shocks and mounts etc.
Only thing you find is it will handle a little vague. Or if you boot it up a hill and try turn it will understeer as it's trying to turn the wheels at an angle not flat if that makes sense???
I'm running a 3" lift with just standard front arms and long drop shocks and mounts etc.
Only thing you find is it will handle a little vague. Or if you boot it up a hill and try turn it will understeer as it's trying to turn the wheels at an angle not flat if that makes sense???
