Project 90 sw Very solid

C reg land rover 90

2.5 na engine but suspected cracked head

perfect for a 200 tdi conversion

Really very solid with one small hole on the passenger bulkhead corner and it is a small hole!

all foot wells and door bottoms solid!!!!

its a sw but does not have rear seat and the front seats are ripped

all pretty original ex farmers truck

front divers wing dented and also area around fuel filler slightly dented

if i wasnt rebuilding my range rover i would keep this myself!

side reapeaters dont work and would need new number plates

would benifit from the brakes spripping and cleaning before dont on the road.

any inspection welcome

1200 ovno

sorry located near stratford upon avon. oh it has PAS

I just sold my e reg 2.5na with tax and mot so you may wana lower the price abit
But good base for a project

Whats the chassis like?

thanks for the tip but i'll decide how much it is thanks. if you lets yours go cheap then thats up to you. its easliy worth my asking price as a solid 90 and could quite easliy break it for that amount if not more.

I bought my last 90 which was t&t and with a galv chassis for £1800 so there are always mugs out there selling stuff far to cheap but i dont have mug wrote on my forehead.

As for the chassis its solid with some surface rust any inspection welcome. the top corner of the bulkhead is the only hole i can find.

Mug!!
I was going to put my 90 300tdi with r380 gearbox with 12 months mot 6 months tax for 1500 but i think i'll sell it for 3k now as i wouldnt want to be a typical mug
Oh well

your welcome

Good luck I want to sell my 97 300 CSw should get 10 k

drewster said:

Good luck I want to sell my 97 300 CSw should get 10 k

Click to expand...

In that case my D2 will have doubled in value, best I advertise it a bit quick for about 6k - there's some mugs out there......

look chaps i've had and sold more land rovers than i care to remember everything from series land rover to classic range rover to 101's. i have worked professionally on the god forsaken things for over 6 years and more on my own. i know at dog when i see one and just because somethnig has t&t does not make it road worthy or solid.

This 90 is up forsale for a realistic price amd it does say 1200 OVNO! if you not interested that fine but im not going to gift it to anyone.

FFs guys the last pair of solid lift up handle door i had went for £400.

I'd better finish me 200tdi conversion on me E reg 90, gotta be worth £10,000.


You by a galv chassised 90 for 1800 and want to sell a nail for 1200?:confused2::crazy::crazy:




Edit-Ha, yer user name describes what you sell

Tat said:

thanks for the tip but i'll decide how much it is thanks. if you lets yours go cheap then thats up to you. its easliy worth my asking price as a solid 90 and could quite easliy break it for that amount if not more.

Click to expand...

Why don't you break it yourself if you can make more money that way ?

Sent from my iPad using Tapatalk HD to annoy the Curmudgeons !

Thats a £500-700 motor.

Tat said:

look chaps i've had and sold more land rovers than i care to remember everything from series land rover to classic range rover to 101's. i have worked professionally on the god forsaken things for over 6 years and more on my own. i know at dog when i see one and just because somethnig has t&t does not make it road worthy or solid.

This 90 is up forsale for a realistic price amd it does say 1200 OVNO! if you not interested that fine but im not going to gift it to anyone.

FFs guys the last pair of solid lift up handle door i had went for £400.

Click to expand...

That's fine, well done, just lose the ****ty attitude or you'll be wasting your time telling peeps on here about it.....

hey i'd buy galv chassis 90 all day long for that money but they dont come up very often.

As for they additude people get that when they comment on things they dont really understand and have no intention of viewing.

as for breaking it i wish i had the time but between my 2 door and my raptor i dont have the time.

but dont worry fellas it will sell and ill get close to my asking price.

i always do

Tat said:

but dont worry fellas it will sell and ill get close to my asking price.

i always do

Click to expand...

Or you'll sell it for £800 and come back and tell us you got £1600 for it

Damn I wish I were you !

Tat said:

As for they additude people get that when they comment on things they dont really understand and have no intention of viewing.

Click to expand...

As i said £500-700.

Making plenty of assumptions about what people do or do not know...you are the seller, so you want an unrealistic price...a buyer will want to pay as little as possible...generally you meet in the middle.

Its an early 80's 90 with basically no engine, no mot, rust issues, untidy bodywork, probably a tatty interior, rough wheels and a bulkhead that may only have a small hole on the outside but definitely issues behind that hole.

Oh, i've imported and exported these for years. You're an arrogant rip-off merchant.

you do realise i have said OVNO.

Does anyone expect to get the price they advertise at?

we all put a bit on to get knock to dont we??

if someone offered 800 i might take it

i must say sorry for calling that chap a 'mug' ( living with a pregnant woman has me on edge)

there is just a horrible trait on this forum of commenting and running down other peoples for sale items.

this sale is perfectly legit and i am open to offers.

You killed it with post 5