Preparing to replace the DMF

OK, so now the weather is better I'm going to have to change the DMF as its getting worse.

So are these all the parts required?

Crankshaft Rear Spigot Bearing - STC2079 - £9.00 x1
Clutch Fork Roll Pins - FTC1692 - £0.49 x2
Dual Mass Fylwheel - 415006810 - £369.23 x1
Clutch Kit - 624213300 - £88.61 x1

All prices plus VAT.

Will I require a prop shaft removal tool?

I have some four large good 6 tonne axle stands, a large 3 tonne jack and a small jack, so I should be OK with that lot.

I'm also looking at a solution to get the gearbox/transfer box down and back up safely. Possibly a second hand transmission jack.

Unless anyone has one I can borrow.

Cheers Simon