Freelander 1 Power sterring

When under car today I noticed spot of power steering fluid.and lots of oil is this a new power steering pump or is there a fix that can be done

PS leaks arw normally shrunken and hardened pipes. Try a new clip and tighten it firmly.

Hi is that the jubilee clip?? Or is there something else??

Shaun4456 said:

Hi is that the jubilee clip?? Or is there something else??

Click to expand...

Yes, the bolt clamp in the picture.

Nodge68 said:

Yes, the bolt clamp in the picture.

Click to expand...

Can it leake from there.
Thought that was just clamp to stop pipes from moving or there join in middle of clamp?

I'll need to check on mine before committing to an answer that.

Nodge68 said:

I'll need to check on mine before committing to an answer that.

Click to expand...

The photo is looking up from where skid plate was looking up to where power steering pump is.
There 2 pipes going in pump.one we bolt and other could be pipe we jubilee clip or clamp of some sort

Shaun4456 said:

The photo is looking up from where skid plate was looking up to where power steering pump is.
There 2 pipes going in pump.one we bolt and other could be pipe we jubilee clip or clamp of some sort

Click to expand...

The banjo bolt fitting is the high pressure output. The HP pipes almost never leak at the swaged fitting. In my experience, worm drive and clamp type hose clips cause leaking over time. This is due to hose hardening and shrinkage.
Often these leaks are cured, simply by replacing the clip with a better, tighter clip.