Power Steering Pipe problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discopaul

discopaul

New Member
Posts
571
Location
Chesterfield
Hi all ive got a fooking split pipe on my power steering. i have a 3.5 V8 landy 90 and its a syatm from a RRC. the hi pressure pipe from the pump has been rubing on a bracket and its split. ive tryed all day to repare the ooking thing but its still ****ing out. Any one help on this one? im ment to be going on a H4H weekend from this fri so it needs to be fit for then!
 
maybe but i was going to give you number of pipe ,if poss give us diameter of thread in pump or spanner size of union,most pipes if right threads can be bent to fit
 
ok well at the pump end there is a big what looks like a nut and the fitting that goes into that is a 16mm from the fitting it goes to a solid pipe (thats split) about 4inch long, then to a flexi hose thats about 3inch long then to a long solid hose that runs to the drivers side wing where the resivor is
 
Looks like this
 

Attachments

  • NTC9072-PAS-HOSE-PUMP-TO-BOX-200TDI.jpg
    NTC9072-PAS-HOSE-PUMP-TO-BOX-200TDI.jpg
    44.6 KB · Views: 575
You must log in or register to reply here.

Similar threads

Acdadefender1
Power steering pulley
Replies
10
Views
991
tottot
tottot
Y
Power steering pump on 300tdi
Replies
0
Views
326
Yasser.
Y
Andy Warren
Disco 2 ACE pipe leak
Replies
11
Views
1K
Andy Warren
Andy Warren
PopPops
Disco 2 FPR pipe unscrewed from cylinder head
Replies
2
Views
330
PopPops
PopPops
Vagabondrobb
Freelander 2 (LR2) Power steering pipe disconnecting
Replies
1
Views
1K
Nodge68
Nodge68
Back
Top