GPN
New Member
- Posts
- 3
- Location
- Chippenham, England
Hi All, I have a battery power drain problem on a 2003 Discovery II.
If I disconnect the battery and re-connect my multi tester, the multi tester shows a 0.01amp drain. If I then open a door and close the door and wait for the lights to go out, it shows a 0.3amp drain. If I pull engine bay fuse 11 (ABS) the drain drops back down to 0.01amp and stays there even when I replace the fuse. If I open a door again it goes back to drawing 0.3amps. I have individually pulled every fuse and relay from the engine bay, the ones under the steering wheel and the remote ones under the drivers and passenger seats, but none of them had any effect, other than fuse 11.
Anyone else had, and hopefully fixed, this problem?
What has the ABS fuse got to do with door opening?
Anyone got any ideas what to try next?
Many thanks,
Gary.
If I disconnect the battery and re-connect my multi tester, the multi tester shows a 0.01amp drain. If I then open a door and close the door and wait for the lights to go out, it shows a 0.3amp drain. If I pull engine bay fuse 11 (ABS) the drain drops back down to 0.01amp and stays there even when I replace the fuse. If I open a door again it goes back to drawing 0.3amps. I have individually pulled every fuse and relay from the engine bay, the ones under the steering wheel and the remote ones under the drivers and passenger seats, but none of them had any effect, other than fuse 11.
Anyone else had, and hopefully fixed, this problem?
What has the ABS fuse got to do with door opening?
Anyone got any ideas what to try next?
Many thanks,
Gary.