poly bush kit

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grit Valve

Grit Valve

2000 4.6 Vouge
Posts
12,465
Location
Plaistow
this summer i want to replace the bushes on my defender i hear all stories about jammed stud's if after cleaned soaked ect if stuck any one know of the best solution im thinking eletric hacksaw cut the buggers any better ways idears appreciated joe
 
yep, you can either burn em out of you can drill em out or you can saw em out with an electic/air hacksaw. burning them out is easier as this also heats up the metal sleeve that needs to be removedif you cant get the sleeve out after you have removed the innards then cut it down its length with a hacksaw and knock it out
 
yella said:
yep, you can either burn em out of you can drill em out or you can saw em out with an electic/air hacksaw. burning them out is easier as this also heats up the metal sleeve that needs to be removedif you cant get the sleeve out after you have removed the innards then cut it down its length with a hacksaw and knock it out
Click to expand...
That's how ah did mine:D burnt thum out, hacksawed the remaining sleeve (top and bottom cos it was a **** tae hammer out!!!) then a clean with sum fine wet'n'dry and the jobs a good un;) :D
 
You must log in or register to reply here.

Similar threads

S
Weber DMTL sudden Idle issues...
Replies
6
Views
789
scott3933
S
MikeDISCO
Disco 2 Poly bush kit
Replies
4
Views
836
MikeDISCO
MikeDISCO
200tdi Land Rover 90
Sam’s Defender 90 TD5 project
Replies
5
Views
2K
KISSMYAURA
KISSMYAURA
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
6K
Goc3k
Goc3k
frostythor
REAR ACE BUSH REPLACEMENT
Replies
4
Views
2K
frostythor
frostythor
Back
Top