Hi all after owning a p38 for 7 weeks I've been very busy on the weekends I have given it a full service I mean full all fluids and filters etc, fuel injection pump, 4 wheel alignment, dvd and ps2 for kids, full valet and the dredded heater o rings
Now last week I done the o rings what a job someone had been there before and damaged the bolt had to take the dash out and drill the bolt out
Well I had the book symbol showing before this and it has now cleared I clean the heater pipe core temp sensor as there was corrosion on the sensor and pipe
The problem I have now is I don't get any air from the center vents I get it on all other settings apart from center/facing I made sure all pipes etc went one and I stayed clear of blend motors etc
Does anyone have a multi use scanner in the norwich are who can scan amd calibrate my blends motors I will come to you and will pay in beer tokens or cash I don't want to go to local indy as I'm in the trade and now how things work ;-)
Any help would be great
Now last week I done the o rings what a job someone had been there before and damaged the bolt had to take the dash out and drill the bolt out
Well I had the book symbol showing before this and it has now cleared I clean the heater pipe core temp sensor as there was corrosion on the sensor and pipe
The problem I have now is I don't get any air from the center vents I get it on all other settings apart from center/facing I made sure all pipes etc went one and I stayed clear of blend motors etc
Does anyone have a multi use scanner in the norwich are who can scan amd calibrate my blends motors I will come to you and will pay in beer tokens or cash I don't want to go to local indy as I'm in the trade and now how things work ;-)
Any help would be great
