Please can someone help me.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

mudinuri

Active Member
Posts
673
Location
New Forest
You"re probably fed up with members question about fitting a facelift front bumper and lights but I have looked, read and still cannot understand how to fit the electrics, the bumper I can sort out..
I know I have to fit a relay but which colour wires go into the relay and which colours go out of the relay and do I fit the relay where the other relay is..
If anyone has a simple hand drawn wiring diagram showing which coloured wire goes from a pre facelift to which colour on the facelift I would be eternally garetful.
In the middle of checking her over for her yearly test(MOT) Fingers crossed.
Cheers
 
You are in luck, looking at circuits, head, dip, beam, side and indicator wiring colours on 2002 and 2004 are identical. Simples !
 
To keep dip on when main beam selected simply strap pin 1 (Blue) and pin 2 (Blue/orange) on the steering column stalk switch so that when main beam is selected the main beam relay operates and the switch continues to power the dip filaments (rather than it disconnecting them as per original). No extra relays or components required according to my diagrams. Electrically this is identical to pulling the 'flash' switch, both filaments light together. Look at the circuits and satisfy yourself how it all works!
 
Hi Andyfreelandy
As you are probably aware I am more than useless when it comes to the electrics but I think I understand what you are saying and will give it a go.
Thanks for that.
 
Back
Top