phase 1

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wiltshire landyman

wiltshire landyman

I’m back
Posts
15,062
Location
salisbury plain wiltshire
started removing bits from me 90 tonite ready for prepping for paint.

still got lots to take off but have made a good start

gonna remove everything i can and then give it a final jetwash as theres still lots of mud in every nook an cranny

Photo0346.jpg
 
yeh will keep a file on how its goin.
the good and the bad,im sure some probs will come up along the way.

biggest prob so far that i thought was just to the front doors which wernt etch primed b4 the last owner painted it,seem to be paint flaking in other various places..
 
most of the utility 110s have the winch controlls and isolators on the wing tops , i like them therem handy till ter stood 3ft in **** to operate them :D
 
youve all missed the obvious..

the wing controls are used mainly for winding in the rope after winching

the main controls are inside the cab:doh:

its a lot easier to wind the rope back on when ya can see how its spooling on the drum
and you then dont have to worry about unplugging those ****e wander leads which ive seen people forget and drive off runnin over the cable n snapping it..

come guys i gave ya all more credit than to fink i would stand at the side of me winch and use it to recover someone..
 
wiltshire landyman said:
youve all missed the obvious..

the wing controls are used mainly for winding in the rope after winching

the main controls are inside the cab:doh:

its a lot easier to wind the rope back on when ya can see how its spooling on the drum
and you then dont have to worry about unplugging those ****e wander leads which ive seen people forget and drive off runnin over the cable n snapping it..

come guys i gave ya all more credit than to fink i would stand at the side of me winch and use it to recover someone..
Click to expand...

i was thinking about doing that but the likely hood of the MOT boy ****ing with the winch controls and bustin summat put me off
 
G-man said:
i think i will stick with a wander lead..........
Click to expand...
orrible fings..

there ok for the occassional p+p

but in a winch challenge there useless,time is of the essence,and ya cant be fookin about plugin in and unpluggin leads,or as ive said forgetting altogether and then drivin of and snappin in half.

i still have the lead in me cubby box but aint used it for over a year
 
Wiltshire,

I'll be watching this thread closely as Im about to start stripping mine down ready for a respray. Ive only got as far as the door cards and im now wondering whether to get the door bottoms repaired.

I'll purposely be a day or two behind you, so that if I encounter any problems I can ask you how you did it:D

Good luck
 
LeadFarmer said:
Wiltshire,

I'll be watching this thread closely as Im about to start stripping mine down ready for a respray. Ive only got as far as the door cards and im now wondering whether to get the door bottoms repaired.

I'll purposely be a day or two behind you, so that if I encounter any problems I can ask you how you did it:D

Good luck
Click to expand...
i can only get to mine a few eves a week so i will be asking you:D
 
haha, Im planing on a paint job in the summer, when its warmer as have no garage. What are your doors like? The base of mine are trashed, but on the outside they is solid. It just the bottom inner plate that rusted badly. is it worth repairing or just cleaning up the mess and protecting it.
 
You must log in or register to reply here.

Similar threads

R
Pig
4 5 6
Replies
101
Views
7K
resto_d1
R
J
Defender 300 Tdi Engine Swap
Replies
4
Views
925
jer_300Tdi_90
J
ChrisBduck
3.6L Land rover 90
Replies
2
Views
992
ChrisBduck
ChrisBduck
styleruk
2.25 petrol rough idle
2 3 4
Replies
60
Views
3K
styleruk
styleruk
D
Steve's Land Raft
4 5 6
Replies
104
Views
8K
Dauphproto
D
Back
Top