poony
Member
- Posts
- 52
- Location
- nottingham
just wondering if there is any way of getting an oversized intercooler for my 300tdi disco without paying 400 squid?
truck wreckers?
aah ok, so there are ones that you can bodge in?
I will be fitting one off a Subaru Impreza but only because it's about the right size
...............and that's a wise move since a WRX FMIC is known for its flow rate capability and efficiency and that's what the OP is trying to achieve.
That being said, I don't think a fast flowing FMIC will change the lower end power gains even with the pressure turned up on the FPR.
The big tyres have killed your pick-up response time, me thinks.
...............and that's a wise move since a WRX FMIC is known for its flow rate capability and efficiency and that's what the OP is trying to achieve.
That being said, I don't think a fast flowing FMIC will change the lower end power gains even with the pressure turned up on the FPR.
The big tyres have killed your pick-up response time, me thinks.
Subarus are known for not being FMIC, hence the bonnet scoop.
ok which vehicles run these transfer boxes? how do i tell them apart?the man speaks the truth.
change your 28D 1.222 transfer box to a
22D 1.410 or perhaps a 34D and you will gain your
bottom end response back in sacrifice of some top end.
I read on a forum somewhere that a Supra one will fit. I cannot remember for the life of me which Supra or where I read it. Not a lot of help I know:nothingtoadd:
most pointless modification you can do on a landrover brick..
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!