Classic Part Number Required ~ Classic Range Rover

jolly-109 · Oct 3, 2015

Does anyone know a part number for the fuel filler pipe which joins the filler neck to the tank. I can only find two part numbers which are NRC2337 or 562662 neither of which are available?

Its a 1990 Range Rover Vogue TD

Any help much appreciated

jamesmartin · Oct 3, 2015

try ntc1382

jolly-109 · Oct 3, 2015

jamesmartin said:
try ntc1382

No good for me I'm afraid, I forgot to mention mine has been modified at some point and requires a straight pipe with the same diameter at both ends (the larger diameter)
The same as the part numbers in the original post, but available

jamesmartin · Oct 3, 2015

esr2834

jolly-109 · Oct 3, 2015

That could be it, thank you

jolly-109 · Oct 8, 2015

jamesmartin said:
esr2834

That is too small sorry, I am looking for a straight section of fuel filler pipe with an ID of 75mm does anyone know of any suppliers

Mick Guilbert · Oct 8, 2015

Are there any stainless exhaust makers near you? it may be cheaper to have a piece made.

jolly-109 · Oct 8, 2015

Mick Guilbert said:
Are there any stainless exhaust makers near you? it may be cheaper to have a piece made.

Not sure if there are but I am also unclear how this will help as I have to join a 3inch filler neck to the 3inch fuel tank inlet?

Mick Guilbert · Oct 8, 2015

The guy who built the custom exhaust for my bike was able to stretch the tube diameter to the size I needed didn't know if the same could work for you?

jolly-109 · Oct 8, 2015

Mick Guilbert said:
The guy who built the custom exhaust for my bike was able to stretch the tube diameter to the size I needed didn't know if the same could work for you?

Ah, sorry Mick I have been unclear what a actual need is "hose" and not pipe it has to join two straight sections of pipe, sorry for the confusion.

Mick Guilbert · Oct 8, 2015

No Problem hope you get it sorted.

EntropyUK · Oct 8, 2015

There's plenty of retailers selling that type of hose just Google it. I had to find a 4" piece to replace a split intercooler hose but cannot remember the suppliers name. Also have you tried a boat chandlers as they have this sort of stuff on hand.

ukadamwest · Oct 9, 2015

make sure that whatever pipe you use it is resistant to hydrocarbons.

EntropyUK · Oct 9, 2015

I forgot to mention that, as a Google for 'fuel hose id 75' pulled up lots of returns. Have you asked a local garage where they would go? What about a scrappie they may have something that they would almost give away.

Classic Part Number Required ~ Classic Range Rover

jolly-109

Active Member

jamesmartin

Well-Known Member

jolly-109

Active Member

jamesmartin

Well-Known Member

jolly-109

Active Member

jolly-109

Active Member

Mick Guilbert

Well-Known Member

jolly-109

Active Member

Mick Guilbert

Well-Known Member

jolly-109

Active Member

Mick Guilbert

Well-Known Member

EntropyUK

Well-Known Member

ukadamwest

Well-Known Member

EntropyUK

Well-Known Member

Similar threads