- Posts
- 2,427
- Location
- Isle Sheppy
Not quiet sure what I’m looking for on the rear axle is it a pan rod or a track rod 1999 4.6 an advice much appreciated
P38A Pan rod
- Thread starter pete12345
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Panhard rod??
Henry_b
Think outside, no box required.
- Posts
- 15,355
- Location
- somewhere else
Panhard rod stops lateral movement of the rear axle..
This bar you see here.
This bar you see here.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Show off,been polishing your bits 'Enery.8Panhard rod stops lateral movement of the rear axle..
This bar you see here.
Henry_b
Think outside, no box required.
- Posts
- 15,355
- Location
- somewhere else
Can never polish 'em too much
- Posts
- 2,427
- Location
- Isle Sheppy
Cheers Henry I’ve already got that one just wanted to make sure it’s fitted right had bushes replaced in it
- Posts
- 2,427
- Location
- Isle Sheppy
It’s spotless under there
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Henry_b
Think outside, no box required.
- Posts
- 15,355
- Location
- somewhere else
Pah!You'll go blind.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
See you meant to type Yes!Pah!
- Posts
- 2,427
- Location
- Isle Sheppy
Don’t suppose you know what the bolts are that go through it do I’ve got so many new bolts I’m not sure which ones go where now
Henry_b
Think outside, no box required.
- Posts
- 15,355
- Location
- somewhere else
I know the bolt is Bi Hex
- Posts
- 2,427
- Location
- Isle Sheppy
Yer most I’m just going through them now
- Posts
- 2,427
- Location
- Isle Sheppy
- Posts
- 2,427
- Location
- Isle Sheppy
4386 but looks like you only have 1
https://www.brit-car.co.uk/product....hex___range_rover_1994_to_2001___discovery_2_
J
Edit ok you got there and i now see 2
https://www.brit-car.co.uk/product....hex___range_rover_1994_to_2001___discovery_2_
J
Edit ok you got there and i now see 2
- Posts
- 2,427
- Location
- Isle Sheppy
No mate I got 2 but there not hex hopefully they be ok
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
'Enery said Bi-hex,i.e. 12 point socket or ring spanner required.
- Posts
- 2,427
- Location
- Isle Sheppy
The one I got from Rimmer are the same part number just different heads
Similar threads
