Packing between chassis and slam panel

My series 3 is missing the rubber isolating packing that goes between slam panel and chassis to reduce vibration to the radiator.
I think part number is 90306465 can anyone tell me if I could make some out of the rubber from an old top hose.

Don't see why not.They are only small squares or rubber anyway so should work okay

you could but its not an expensive part
Famous Four - Part Information for FF007084 - Rubber Pad - Radiator Front Panel to Chassis - Series IIA and III Land Rover

Thanks for info, was trying to save a few quid for other bits. Am I right in thinking that there is 2 per fixing (6 in total needed)and would top hose rubber be about the right thickness or do I need something thinner?

Hose will be fine not be worth the postage to order just these

I did originally phone LR Fasteners and got a price of £15 which included postage. Series is sat in garage slowly being taken apart and then put back together replacing what I think it really needs and making a note of what it will need at some point in future.
Only knew they were missing after reading your comment on samc88 rebuild.
Thanks again for help.

mine were missing as well when I took it apart

I spent 50p on a rubber mat from Tesco which I've used to replace many of the rubber bits on my landy. A double thickness for the rad isolators seemed about right.