2004 Disco Grille

R

RizzleKicks

Active Member

Posts

254

• Oct 22, 2023

• #1

Afternoon ,

Am looking for a part number for a 2004 TD5 grille. Grille was removed to get the headlights out. When grill was pulled out there were a couple of rubber grommets 3 inches approx in length, which the plastic legs of the grille slip into.

Does anyone what the part number to these grommets are ?

Also the part number to the 3 X plastic screws on the slam panel that holds the grille in place

TIA

 

Keith_L

Well-Known Member

Posts

408

Location

Worcestershire, UK

• Oct 22, 2023

• #2

I think you will find what you want here:

Genuine Grille Panel & Headlamp Finishers For Land Rover Discovery 2 1998 - 2004 Classic (l318) | Jaguar Land Rover Classic Parts

parts.jaguarlandroverclassic.com

Grommets are BTR6638

Scrivets are DYQ100230

Neither are available from Land Rover but a breaker or someone on the internet might have some. I vaguely remember my grommets were missing and I improvised with some grommets for electrical cables entering metal boxes.

 

A

Anaconda

Well-Known Member

Posts

3,695

Location

Thames Valley

• Oct 22, 2023

• #3

Measure the hole in the slam panel and buy some clips to suit from Ebay.

 

R

RizzleKicks

Active Member

Posts

254

• Oct 22, 2023

• #4

Not the gromit I'm looking for , the gromit as explained in initial email is about 3 inches in length more like a sleeve to the pegs that are attached to the grille.

 

A

Anaconda

Well-Known Member

Posts

3,695

Location

Thames Valley

• Oct 22, 2023

• #5

RizzleKicks said:

Not the gromit I'm looking for , the gromit as explained in initial email is about 3 inches in length more like a sleeve to the pegs that are attached to the grille.

Click to expand...

Getting confused, so it's a rubber sleeve which goes on the lower pegs on the grille?
If so find a bit of suitable rubber pipe, hose pipe maybe.
Top clips, I think I used ones from a Mini sill cover. Will have a look next time my son is home.

 

Keith_L

Well-Known Member

Posts

408

Location

Worcestershire, UK

• Oct 22, 2023

• #6

I'm confused as well now. The only grommets are those that fit into the holes in the metal - item 4 in the LR parts diagram. The pegs on the grill then slide inside the grommet. I'm not sure what the 3 inch long grommet is that you refer to if it is not item 4.