p38a door problem
- Thread starter carper10
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
gold rover
Well-Known Member
- Posts
- 10,132
- Location
- Scotland,
Welcome.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,289
- Location
- Trapped inside my head @ LZ asylum
Il try again,
Welcome
Welcome
RangeRoller dt
Well-Sprung Member
- Posts
- 14,289
- Location
- Trapped inside my head @ LZ asylum
If you look at the metal channel going around the outside of the door there is little plastic pips poking through (might be hidden by foam bit)
The connectors are on the other side of them
I posted a photo of this few weeks back but can’t find the pics now
The connectors are on the other side of them
I posted a photo of this few weeks back but can’t find the pics now
- Posts
- 15,332
- Location
- Benfleet, Essex
I will find you a picture of the plugs and what colour wire goes where.
Is this it? Top pic is the older 2-plug layout. Bottom one is the later single plug.
These pics came from elsewhere.
Is this it? Top pic is the older 2-plug layout. Bottom one is the later single plug.
These pics came from elsewhere.
Last edited:
RangeRoller dt
Well-Sprung Member
- Posts
- 14,289
- Location
- Trapped inside my head @ LZ asylum
Dan.....
This is the place mate
This is the place mate
RangeRoller dt
Well-Sprung Member
- Posts
- 14,289
- Location
- Trapped inside my head @ LZ asylum
Point for Alan
View attachment 215880
Someone’s been in here (with a hatchet by looks of it) taped cables up but fell off. Wires catching in window mechanism.
Seem in one piece though, have a white unconnected connector with 4.8v going through it can’t see where it would go, then a black wire from that loom with a taped join going to the door mechanism?
View attachment 215888
Photos attached ^^^ (click the green)
Mine is early so only has one.
Henry_b
Think outside, no box required.
- Posts
- 15,362
- Location
- somewhere else
Download Rave and look at the wiring diagram for the latch..
I'd post a pic of my wires, but i have the latter model with the single plug.
I'd post a pic of my wires, but i have the latter model with the single plug.
yes but can i need both ends as i have wires out of both ends of the top one mine is a 6 pin and both sides please
- Posts
- 15,332
- Location
- Benfleet, Essex
Hmmm....take the other door panel off and get the clues from there?
Download Rave and take a look for yourself?
For some unknown reason RAVE no longer runs on any of my PC's the Adobe app just bugs out.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,289
- Location
- Trapped inside my head @ LZ asylum
You need the old version to read it usually. Looks like it’s updated it off.
- Posts
- 19,000
- Location
- Buckinghamshire, UK. ('95 DT)
That's the older model like mine. Smaller plug is single black wire. Wires should be clipped in. One of my old threads has pictures.
