P38 Workshop Manual, Get a copy here

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
For all the people posting their email addys for all to read: there are bots that are programmed to search for exactly this format ( [email protected] ). They gather these addys and send them back to SPAMMERS. So, unless you're into reading about Penile enlargement, Viagra, and BodaciousBeautiesBurgledByBulgarianBrownBacks:
DO NOT POST YOUR EMAIL ADDRESS IN AN OPEN FORUM.

And if you'd bother to read, you'd have seen exactly this info by the more experienced users a dozen times in 8 pages. And if you'd bother to read a little more carefully, you'd have seen that the original post was well over a year ago and I'd be very surprised if Jonathan was still hovering over his keyboard 18 months later waiting to mail people copies of the manual (he hasn't even been here in nearly half a year!).

And if you'd have bothered to read at all you'd have seen at least 2 dozen references to sites where you can download all the manuals you need and achieve instant gratificatorial bliss!

But I am probably wasting my time here as no one is going to read this either :rolleyes:
 
Last edited:
Hello there,
I just sent you an email this morning,would be very thankful if you could help me out.
Regards
 
For all the people posting their email addys for all to read: there are bots that are programmed to search for exactly this format ( [email protected] ). They gather these addys and send them back to SPAMMERS. So, unless you're into reading about Penile enlargement, Viagra, and BodaciousBeautiesBurgledByBulgarianBrownBacks:
DO NOT POST YOUR EMAIL ADDRESS IN AN OPEN FORUM.

And if you'd bother to read, you'd have seen exactly this info by the more experienced users a dozen times in 8 pages. And if you'd bother to read a little more carefully, you'd have seen that the original post was well over a year ago and I'd be very surprised if Jonathan was still hovering over his keyboard 18 months later waiting to mail people copies of the manual (he hasn't even been here in nearly half a year!).

And if you'd have bothered to read at all you'd have seen at least 2 dozen references to sites where you can download all the manuals you need and achieve instant gratificatorial bliss!

But I am probably wasting my time here as no one is going to read this either :rolleyes:

i reckon this thread should be locked listing any links that are still active at the bottom and or making a sticky with the links in there!!!!

wheres a moderator when you need one!!!:D:D:D
 
Hi Jonathon,

I would be grateful if I could have a copy currently my 4.6 HSE P38 will not start. got out of it yesterday all ok, started and not a problem went to it this morning and nothing, lights, voltage, gear stick in P, also tried N, all ok in key position 2, but when turned to key position 3 nothing at all. Checked the relays and fuses.... Any help and suggestions would be good.
 
For all the people posting their email addys for all to read: there are bots that are programmed to search for exactly this format ( [email protected] ). They gather these addys and send them back to SPAMMERS. So, unless you're into reading about Penile enlargement, Viagra, and BodaciousBeautiesBurgledByBulgarianBrownBacks:
DO NOT POST YOUR EMAIL ADDRESS IN AN OPEN FORUM.

And if you'd bother to read, you'd have seen exactly this info by the more experienced users a dozen times in 8 pages. And if you'd bother to read a little more carefully, you'd have seen that the original post was well over a year ago and I'd be very surprised if Jonathan was still hovering over his keyboard 18 months later waiting to mail people copies of the manual (he hasn't even been here in nearly half a year!).

And if you'd have bothered to read at all you'd have seen at least 2 dozen references to sites where you can download all the manuals you need and achieve instant gratificatorial bliss!

But I am probably wasting my time here as no one is going to read this either :rolleyes:

Hello I'm new to this forum and its my first post.
I'm shocked at how slow some people are on internet security :doh:
Can this post be left open for another year or so ... I'm finding this hilarious ..
 
:) Just a quick message to all P38 owners. I have a copy of the P38 workshop manual, in PDF format, in case anyone needs it. Ive already had a few people from this site request a copy of it from me. People are charging, on ebay, for the exact same thing as i have. If anyone needs one feel free to email me and ill send you a copy. Free of charge to LandyZone members off course.
Jonny

[email protected]

Jonny i would love a copy of workshop manual,my p38 is a nightmare at the moment,trying to sort it out,the way its going i will take the lump hammer to it.
regards
Mike.
[email protected]
 
A bit late in the day - but, is this still available? Owned Landrover's for the last 27 years - had a P38 for 12 months and the lack of spanner info is ridiculous - as is the need for a electronics degree.
Any 'proper' spanner detail is much welcome!

Rich.
 
Hello Jonny, really would appreciate a copy, I have only owned it, P38, for a week and already I've replaced the transmission sump, transmission oil and fuel filter. I didn't really need a new hobby but.................................
Many thanks
Tim
[email protected]
 
Hello Jonny, really would appreciate a copy, I have only owned it, P38, for a week and already I've replaced the transmission sump, transmission oil and fuel filter. I didn't really need a new hobby but.................................
Many thanks
Tim
[email protected]

Do you like spam?
 
Back
Top