p38 suspension
- Thread starter grumpy52
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
john-sussex
Member
- Posts
- 71
yer me too? Sounds like they just have read the codes rather than sorting. Valve blocks can be overhauled these days. What was your problem? could just be a sensor or leak somewhere.
- Posts
- 58,170
- Location
- Preston Lancs.
No such fault. Which one did you take it to? Likely to be LHF or LHR valve stuck shut. Which basically means the ECU has commanded a movement no movement has taken place so ECU thinks a valve is shut.
Last edited:
the problem was all the lights came up it wouldnt do any thing eas fault on on dash so garage l bought it off recovered it took it to independent landrover in preston and that cis what ti said on sheet. have got cable but we are busy moving house so when we have moved will check it out on cable with lap top
- Posts
- 58,170
- Location
- Preston Lancs.
Did you take it to the one in Murry street?
Datatek
Well-Known Member
- Posts
- 43,970
- Location
- Near Poitiers SW France
As Wammers said, no such fault, either a leaking airspring or a height sensor as the most likely cause.
