p38 propshaft vibration???

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

cstack1298

New Member
Posts
8
ok, so after churning through all the ****ty jobs with this wonderful beast i am on to the next! i have a vibration on deceleration, usually around 30-60mph. at first it sounded like exhaust back pressure but over 60mph the vibration frequency gets higher pitched. any suggestions?? i have some uj's ready to change. can someone explain the propshaft a bit more to me? can the sliding joint be romved and re-greased? i do have a problem when the suspension goes up almost like going through a sticky shock but i have replaced them all and still get it so im maybe thinking that the prop sliding joint is a bit dry. any help would be appreciated.
 
ok, so after churning through all the ****ty jobs with this wonderful beast i am on to the next! i have a vibration on deceleration, usually around 30-60mph. at first it sounded like exhaust back pressure but over 60mph the vibration frequency gets higher pitched. any suggestions?? i have some uj's ready to change. can someone explain the propshaft a bit more to me? can the sliding joint be romved and re-greased? i do have a problem when the suspension goes up almost like going through a sticky shock but i have replaced them all and still get it so im maybe thinking that the prop sliding joint is a bit dry. any help would be appreciated.

There should be a nipple on the sliding joints. If the UJs are knackered replace the ASAP. If you get a winding down noise on deceleration usually diff pinion bearings.
 
Last edited:
Back
Top