tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Nah, he was messing with the relay
just because its sending power doesn't mean its being recieved
P38 Non starter.
- Thread starter marky
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
just because its sending power doesn't mean its being recievedClock guy, I concur with Grrrrrr, great info, along with all others.
With blackpipe off at filter, still no fuel..
So I think all are agreed that tank pump is issue.
My problem here is after standing since January EAS is on bump stops, without engine running I can't pressurise system? Can I.....
So other than jacking rangie up 4' on driveway and laying underneath axle stands I will need to opt for B plan, cutting sunroof in floor under seat.
I will look at threads and see if I can get hold of exact cutting point for next weekend project.
Thanks all.
Marky
With blackpipe off at filter, still no fuel..
So I think all are agreed that tank pump is issue.
My problem here is after standing since January EAS is on bump stops, without engine running I can't pressurise system? Can I.....
So other than jacking rangie up 4' on driveway and laying underneath axle stands I will need to opt for B plan, cutting sunroof in floor under seat.
I will look at threads and see if I can get hold of exact cutting point for next weekend project.
Thanks all.
Marky
- Posts
- 18,982
- Location
- Buckinghamshire, UK. ('95 DT)
You could use an emergency inflation kit on the EAS but make sure you use stands still. However, you only need to jack the arse end up and I don't think it needs to be that high. The fuel tank is held in place by a single piece of steel with a few bolts. Getting the fuel out is the biggest pain but you said you only had /4 tank so not so bad.
