p38 help please
- Thread starter kev87
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
have you had it on computer?
you need to make sure plugs and leads are good, they often breakdown under load.
once you can see live data from the ecu you can get a picture of what is happening.
you need to make sure plugs and leads are good, they often breakdown under load.
once you can see live data from the ecu you can get a picture of what is happening.
- Posts
- 1,205
- Location
- The Flat lands of Cambridgeshire
try starting motor, get a friend to keep a foot on the throttle and unplug it while it is running
See what happens then
See what happens then
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
what are the readings from lambdas? maybe it needs time to adjust or a reset?
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
trouble is trying to sort a problem with only half the info!!! you'll end up guessing and possibly guessing wrong!!
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
thats gonna keep costing, it'd be handy if anyone with a elm327 was in your area or you can get free garage time!!!!
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
220549912867 is the type i have but i think they are all the same inside!
