P38 Diesel EAS Diagnostic Socket

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
F

firstthebanker

New Member
Posts
69
Location
Huddersfield
Hi Everyone.

Could someone point m in the right direction to get a replacement Diagnostic socket for a p38.

When I move the socket about I get the occasional connection, but more often than not I dont.

I've rang a few places and they all want to sell me a loom for £300, when the plug itself will probably be a tenner tops.

Thanks


firstthebanker
 
Get one from a breaker. Alternative is to try and resolder the connections at your existing OBD socket using new lengths of cable spliced in and heat shrink sleeving over the joints. The EAS pins are a pain to communicate with at the best of times and need to be clean and make a 100% connection with the plug.
Try a PM to Dantheman4.6 as he breaks P38's if needs be.:behindsofa:
 
OOOPssss, I must admit I went on the picture which showed the female OBD2...

Do you think 1.6mm unshrunk heat shrink will be OK...


Fingers crossed....


firstthebanker
 
Hiya,

OK I got the replacement OBDII plug this morning.

Before I go and blow up my pride & joy could some please tell me which are pins 1 and 9 from this diagram.

Picture1.jpg


As I look at the plug with the widest on the bottom is number 1 pin on the bottom left and 9 pin top left?

And what does 6 & 14, and 10 & 2 mean?

Cheers guys

firstthebanker
 
You must log in or register to reply here.

Similar threads

pwood999
P38A Asthmatic EAS Exhaust Port !!
Replies
6
Views
703
pwood999
pwood999
feyniriel
P38 EAS problems
Replies
18
Views
1K
pwood999
pwood999
J
P38A p38 EAS - immediate drop of pressure
Replies
11
Views
708
Mark Piercy
Mark Piercy
DollyBird
P38A Searching for die hard P38 guru - EAS
2
Replies
20
Views
2K
DollyBird
DollyBird
ukadamwest
P38A Farewell to another P38.. or hello ?
Replies
18
Views
2K
Grrrrrr
Grrrrrr
Back
Top