P38 codes

D

davox

Member

Posts

54

Location

Sheffield, south yorkshire!!

• Feb 17, 2010

• #1

Hiya
Just had the lpg overhauled on my p38. Two injectors down and missing under load. All sorted and no problems I'm aware of but 2 fault codes came up.
PO 444 evaporation immision control system. Purge control valve circit open
And P1319 non standard code

Any ideas and do I need to worry?

 

J

jtonthebike

New Member

Posts

34

• Feb 18, 2010

• #2

Hi Bud,

Just googled that code and got:
P1319 Land Rover Misfire with Low/Empty FuelDrive cycle C:Signal out of range - above maximum

Hope this helps
jt

 

J

jtonthebike

New Member

Posts

34

• Feb 18, 2010

• #3

BTW, got it from here: Diagnostic Trouble Code Library

 

hippolover

New Member

Posts

672

Location

Perthshire

• Feb 18, 2010

• #4

I recently had the Low/ Empty fuel misfire along with Multiple misfires and Misfire cyl 7. Turned out it was one of the two coil packs. Changed, faults cleared and no more misfire. It was showing up under load, typical of a misfire.