Morning All ! I`ve got to change the front brake hoses, as one is showing signs of fluid seepage. Being a "Billy No Mates" whats the thoughts on using an "Easi-Bleed" or similar. Reading RAVE it doesn`t seem possible to do it single handed. And I do intend following RAVE and not taking any short-cuts thank-you.
P38 brake bleed
- Thread starter gtland
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
p38on22s
New Member
- Posts
- 324
- Location
- uk--- clacton on sea
ive used a easi bleed before no probs admitidly not on a rr , have also locked brake pedal down and undone bleed nipple to release air and that worked well
- Posts
- 58,170
- Location
- Preston Lancs.
If you are quick and use a clamp on the new hose you should not need to bleed the full system just the lines you have changed.
ROBV8
New Member
- Posts
- 48
- Location
- Tring hertfordshire
Just use the old fashion bottle method, piece of vacuum pipe on the nipple and other end in a bottle with the end sat in some fluid. Just simply pump the pedal till the air bubbles stop in the bottle then do nipple up. You'll be fine.
Andyp38
Active Member
- Posts
- 150
- Location
- Bridport,Dorset..
Ive used an easi-bleed to do all 4 corners on a p38 with no problems.
