First off the sump is not alluminium, it's steel. I don't know what you are undoing, but it's not the level plug which is on the front of the sump unless your car has a dipstick, in which case you fill via the dipstick tube.
Whatever it is, it sure aint normal.
That would make sense
Same way as you do on later cars without the dipstickHas it got a dipstick? looks like someone has cobbled up something to blank off the hole. Probably the only think they had to blank it off was a double male connector and used a ball bearing and a female union to seal it. If the dip stick is missing, how are you going to heck the level?
Same way as you do on later cars without the dipstick
Nope, just the filler hole where the dipstick went on earlier cars.take it they have a level plug as well then
take it they have a level plug as well then
Undo the union. If need be remove the sump, would be a good idea to do that and change the filter while you are at it.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
