P38 ATF cooler pipes.

AntS70 · Feb 12, 2009

Does anyone know if these are the correct atf cooler pipes to fit the 99 2.5 dse. Just bought a cooler and want to know if they are correct pipes and right price.
TIA.

http://cgi.ebay.co.uk/Range-Rover-P...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318
http://cgi.ebay.co.uk/Range-Rover-P...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318

wills · Feb 12, 2009

According to Microcat they are correct.

Personally not a fan of ****part, sorry, Britpart, had stuff from them, such as a water pump and it failed after 2 months, luckily when the bearings went on it, the spinning fan managed to completely miss the new rad which had been installed.

-Wills

AntS70 · Feb 12, 2009

Are they any worse than the oem ones as they seem to leek at all hose to pipe joints?
Where is best place to get oem?

Irishrover · Feb 12, 2009

Take your old assemblies to Pirtek (Used to have a place at the back of Digbeth) and ask them to swage new hoses on to the steel ends.

AntS70 · Feb 13, 2009

Caught you out Wills, they're engine cooler pipes not ATF.

Your micromat must be stuffed!

wills · Feb 13, 2009

just typed in the numbers that I saw on the eBay page, never even made spotted they were the oil cooler lines

Still not a fan of Britpart stuff though

-Wills

AntS70 · Feb 13, 2009

Read a few posts and gitpart don't have too good a rep so got them from dealer at £156 for the two but got a brand new lr cooler for £59 off flebay so not too bothered. Thanks anyway.

Irishrover · Feb 13, 2009

Blimey Ant, you must be loaded. Wouldn't have paid £150 for a couple of low pressure hoses. Pirtek would have used hydraulic greade hose and swaged both for around £50.

AntS70 · Feb 13, 2009

It's time John, which i aint got a lot of these days (not that i'm complaining) working all hours as i work for myself so it's just easier and quicker to get them from dealer and they are only a mile from me too. Thanks for the info though, i might drop the old ones in to them and get them done.

Irishrover · Feb 13, 2009

If your working for yourself, that's understandable given that you have to take work when it's going.
For info.-Pirtek also fit new aircon grade hose to your metal ends. I had the low pressure one from the compressor go last year, it had gone at the swage, they fitted a new hose to my existing pipes and charged me €45 (£30 at the time). New hose from LR over £100 and the one thats fitted is far superior hose to the standard original equipment.

P38 ATF cooler pipes.

AntS70

New Member

wills

Well-Known Member

AntS70

New Member

Irishrover

Well-Known Member

AntS70

New Member

wills

Well-Known Member

AntS70

New Member

Irishrover

Well-Known Member

AntS70

New Member

Irishrover

Well-Known Member

Similar threads