P38 2001 DHSE computer lights out

A light has gone out on the computer screen in the instrument binnacle and reading the display is difficult due to this failure. I understand that there are three bulbs which light up the screen. I don't want to dismantle the dash consule until I have the replacement bulbs to hand can anybody tell me what spec these are and where can they be obtained.

Also only one has gone out but would it be advisable to repalce all three?

12 volt 1.2 watt minature capless, about 40p each from motor factors.

Or £2.95 each from Halfrauds, unless you have their Trade Card, upon which the price will be about 90p each.

Be careful you specify 1.2 watt bulbs as higher wattages are available that will still fit the holders, but you could melt your instrument cluster plus the message display will be too bright.

Usually cheaper by the box from a good Factor.

Thanks for the information. Have now sorted the problem and can now read the computer screen.

Actual spec for instrument panel LCD illumination is 14volt 1.4 watt. With a T5 bulb holder. But the ones specified for the Hevac LCD will do. 12 volt 1.2 watt.