bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Ah'm needin' tae do me clutch?
Got these so far....
Got these so far....
Owt else...
- Thread starter bustersbus
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
stevieb42
New Member
- Posts
- 838
a mechanic 
tae fix it once you`ve buggered it up
tae fix it once you`ve buggered it up
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Ayea mechanic
One o' them wid be handy fur when ah come tae do it Stevie 
pos
Well-Known Member
- Posts
- 3,685
- Location
- West Yorkshire
Yes... a tie wrap to keep the clutch fork and the ball point / push rod held together according to LR4X4 anyways. I wouldn't put one on, what if it snaps! The you've got a piece of plastic floating around to bugger things up:
http://forums.lr4x4.com/uploads/1190943244/med_gallery_2_361_25871.jpg
http://forums.lr4x4.com/uploads/1190943244/med_gallery_2_361_25871.jpg
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Aye true pos
Ah did have a look at that site earlier but it doesn't say what parts ah needed!! Ah phoned me local indy and they said they had a kit, but it was a britpart one and ah wasn't too keen on it so ah upgraded to some better stuff for an extra tenner! The seal and gasket in the bottom left of piccy is for me gearbox leak problem ah'm havin' too!
pos
Well-Known Member
- Posts
- 3,685
- Location
- West Yorkshire
ahh
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
a big washer to weld onto the fork arm for reinforcement.
- Posts
- 83,310
- Location
- Embasinga stocæ
I fink thats one mod every noo clutch autta have - but dint i see that yu can get reinforced arms now?
Oddie
AntiSeptic Sandal Wearer
- Posts
- 26,178
- Location
- In a puddle in Kernow
If yer gets the OEM HD 130 3 bit clutch then it's all reinforced and mighty strong. Asked them to put that on mine (well, they suggested it!!) when they changed the injun over, so it should last forever...assuming they actually did it, which is wot i paid em to do!
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Where would that go Trewy?
Ah've got the heavy duty arm with a plate welded across it
- Posts
- 83,310
- Location
- Embasinga stocæ
I dont think yu need it, Buster - yu have the reinforced arm - as per my post #8
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Cheers Daft
Ah was thinkin' it was maybe another place it was needin' strengthened.The arm is part no. FTC2957HD (for them that's lookin' for a heavy duty one)
- Posts
- 83,310
- Location
- Embasinga stocæ
please see amended post
I have bin known to be mistaken - not wrong, just mistaken...
its a man thing
I have bin known to be mistaken
- not wrong, just mistaken...its a man thing
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Hahahaha! Fly one
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
- Posts
- 83,310
- Location
- Embasinga stocæ
cough
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
looks like you've already got a reinforced arm.
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
landy10
New Member
- Posts
- 1,872
when ye tekkin yer box oot then buster?
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Hopefully next weekend if everything goes tae plan
