OIL PUMPS- GUIDANCE

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ciderman

Active Member
Posts
770
Location
sunny worcestershire
Hi, why is a land rover oil pump £300 and a pattern £40? do they work- is there a video anywhere showing how to check clearances? - I have workshop manual. What does bad look like???
thanks
 
https://www.turnerengineering.co.uk/PBSCCatalog.asp

ive used these to buy oil pump spares for my series and 200tdi engines pumps which are same/similar
The plungers get wear on them and also flat spots seen on springs may cause to stick
The handbook shows method of checking end clearance on gears as in pic
You can inspect the gears for wear and may see wear /grooves on teeth from dirty oil
I would not trust cheapo ok pumps , it might be on Turners website under information/articles Better to use old genuine than cheapies
 

Attachments

  • 1B3F5028-67E3-48FE-95C0-3C39E7427918.png
    1B3F5028-67E3-48FE-95C0-3C39E7427918.png
    457.5 KB · Views: 150
  • 82E10DC4-3C4E-4B39-9E5D-24B949D20299.png
    82E10DC4-3C4E-4B39-9E5D-24B949D20299.png
    375.4 KB · Views: 153
Hi, why is a land rover oil pump £300 and a pattern £40? do they work- is there a video anywhere showing how to check clearances? - I have workshop manual. What does bad look like???
thanks
pull the pump apart and visually check for wear, if its just polished up rather than deepish grooves and scratches fit a new relief valve and spring ,pumps arent a weak point
 
Back
Top