- Posts
- 2,145
- Location
- East of England, UK
Has anyone replaced their oil pressure switch with one that actually gives an early warning? The standard one comes on at around 0.2bar which to me seems too late!
Oil Pressure Switch - TD5
- Thread starter tom1979
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
steve2286w
Well-Known Member
- Posts
- 4,574
- Location
- monkeyangerland
https://www.holden.co.uk/p/low_oil_pressure_adjustable
You can set this to what you want, I have a gauge on my series 3
You can set this to what you want, I have a gauge on my series 3
Jimsky Korsokov
Active Member
- Posts
- 142
- Location
- Cotswolds
T-piece and a gauge - you can never have enough information about oil pressure
- Posts
- 2,145
- Location
- East of England, UK
You’re right but I’d rather not have oil running into the cab so want either an earlier low pressure warning or a transducer setup
Well, ok - but a capillary gauge is the gold standard for measuring oil pressure..... there are electrical oil pressure gauges - but they're not as good, and just another electrical "thing" to go wrong - A quality capillary gauge will last longer than you, so I wouldn't worry about oil in the cab...
sierrafery
Well-Known Member
- Posts
- 17,910
- Location
- Arad/Romania
- Posts
- 2,145
- Location
- East of England, UK
Well, ok - but a capillary gauge is the gold standard for measuring oil pressure..... there are electrical oil pressure gauges - but they're not as good, and just another electrical "thing" to go wrong - A quality capillary gauge will last longer than you, so I wouldn't worry about oil in the cab...
well there is that yes!
